Trabajos de Titulación - Sede Azogues - Ingeniería Electrónica

URI permanente para esta colección

Examinar

Envíos recientes

Mostrando 1 - 5 de 42
  • Ítem
    Acceso Abierto
    Red de fibra óptica hasta el hogar, con servicio triple play, para nuevos abonados en la SERPORMUL S.A., en el cantón Biblián, provincia del Cañar
    (Universidad Católica de Cuenca., 2018) Prieto Reinoso, Edwin Santiago; Ortega, Juan Carlos; 0301590675; ., .
    This thesis pretends to perform a network design of optical fiber in SERPORMUL in Azogues city, Cañar Province, in a use case applied in Biblián, considering GPON technology for optical communication and CWDM processes for wavelength multiplexing. In this way look for how to reach to the final consumers in order to provide a “bundle” of services “Triple Play” (cable television, telephony and internet access.) The main goal is to design an optical fiber network which gets home using GPON to improve the quality and speed data in TV, internet and IP telephony services in Biblián downtown. In Chapter I the theoretical foundations will be presented to understand the optical networks and fiber world, its history and evolution as well. In chapter II an analysis about the Enterprise actual situation is done, the work schemes are defined and the main equipment of the network proposal are determined. Chapter III is the most important part of this work, here the design and calculations are defined, also the GPON complementary equipment. In chapter IV a feasibility analysis and projects costs are carried out, defining in numbers the application possibility.
  • Ítem
    Acceso Abierto
    "Adaptación de la tecnología estándar de comunicación en el campo del control y supervisión de procesos industriales (OPC), en un prototipo de sistema SCADA basado en la plataforma Ignition y controladores lógicos programables"
    (Universidad Católica de Cuenca., 2018) Ordoñez Lliguicota, Luis Vinicio; González Redrován, Javier; 0302893169; ., .
    The implementation of an OPC communication architecture, allows to integrate diverse independent technologies of the manufacturer, offering a better management in the control and monitory of an industrial process. The existence of proprietary systems dependent of hardware and skilled software, require of costly investments and of problems of interoperability in front of a deficient adaptation. In this, the protocol OPC presents a firm solution, reliable and flexible, deleting these impositions endowments that the OPC Foundation compact in his versions of OPC classical and OPC UA. This graduation work shows a prototype of system OPC SCADA designed in the platform Ignition, which controls and monitor from a local network the micro climate of a greenhouse scale model. By means of basic control techniques, it is possible to regulate the climatic conditions of humidity, temperature and quantity of water. To do it, it is employed OPC servers with different types of technologies (PLC, Arduino and Raspberry Pi) that manage several processes and that are executed from different platforms. In conclusion, the prototype proposed, constitutes an interesting subject to explore new alternatives, by evaluating embed devices so that they can be used as profitable and sustainable tools in the industry, allowing the adequacy of this technology with a very low cost of investment.
  • Ítem
    Acceso Abierto
    Diseño y construcción de un sistema de aquisición, procesamiento y visualización de datos para el análisis de la radiación UV. Casos de estudio: Azogues
    (Universidad Católica de Cuenca., 2018) García Tarqui, Fabián Antonio; Mata Quevedo, Jean Paúl; 0302365549; ., .
    The purpose of this present investigation is to expound the design - construction and implementation of a data acquisition system which allows analyzing the Ultra Violet (UV) radiation emitted by the sun over the city-Azogues, as well as visualize it by means of using a visual indicator (solar-tra c light). In order to monitor the solar activity in an arranged period of time, from 7:00 am to 19:00 pm, a system which consists of a Zopt2201 radiation sensor is used. This settled period of time is controlled by using a RTC clock module that is synchronized with an Arduino microcontroller, which is the brain of the process. The obtained data is stored in a micro SD memory in a text le. Once the monitored index data has been obtained, the microcontroller activates itself the accurate light indicator according to the color scale established by the World Health Organization (WHO). For six months in a roll the solar radiation has been monitored, an analysis of the variations that the UV index showed throughout the day with a time interval of ve minutes between each sample is done, as well as the average of the data collected in every single month respectively, these variations are being represented using graphs of sequential values. The process of the designing detail, construction, implementation and outcomes are presented in the content of this document and in the respective Annexes that prove the process carried out and the data acquisition as reliable. Finally, the conclusions, recommendations and future work are presented, the prior one being one of the most important aspects, thus being recommended the continuance of the present project either short or long term, with all the aforementioned, the achievement of the proposed objectives is clear.
  • Ítem
    Acceso Abierto
    Monitoreo de tráfico vehicular mediante el tratamiento de imágenes usando OPENCV
    (Universidad Católica de Cuenca., 2018) Carangui Siguencia, Héctor Adrián; Mata Quevedo, Jean Paúl; 0302628847; ., .
    This work is about the use of artificial vision and the digital processing of images to monitor traffic in real time, also it targets the use of electronic devices such as the electronic card Latte Panda it is the electronic brain, additionally Microsoft Visual Basic software and the OPEN CV bookshops were used to reach the objective. The MOTRAVE project was developed, it means “Monitoreo de Trafico Vehicular” this study determines the vehicular flow in different zones of the city and permits to be adaptable to the return variable to measure, it could be reached through out the programming, it means this device can isolate objects from the census offering some ways to do studies. It has a database, which helps that data could be stored by date and time. This study determines the traffic flow on the streets in Azogues.
  • Ítem
    Acceso Abierto
    Prototipo electrónico para el desarrollo de prácticas experimentales de física en el bachillerato
    (Universidad Católica de Cuenca., 2019) Matute Nieto, Carlos Sebastián; Mata Quevedo, Jean Paúl; 0302187133; ., .
    In chapter one, the problem and the possible solutions are diagnosed; in addition, the general objective, the specific objectives, the hypothesis, the thesis contributions that are: theoretical - methodological contribution, the practical contribution, the scientific novelty; and the state of the art, are in it. The second chapter is about the theoretical foundation where the fundamental bases referring to physics laboratories are investigated, such bases are their use, basic laboratory practices and the stages to carry out laboratory practices; An analysis is also carried out on: software in teaching - learning, educational software, educational programs characteristics, types of educational software, among others; In addition, electronic software is investigated: Arduino and LabVIEW, sensors, motor, conveyor belt, module to control the direction and speed of the motor, these will be used in the electronic prototype construction for physics practices. The third chapter refers to the materials or elements basic requirements which are part of the physics laboratory; an investigation on the diagnosis of the Azogues schools physics laboratories is made through surveys in six different schools which were selected strategically, for this survey the first year high school students were selected, the objective of this is to know the physics laboratories current situations in different schools, the total number of students surveyed is 192. The fourth chapter aims to the electronic prototype design and construction, which has been developed in five parts. The first one is the model design, the second part is about the model design, the model was made in wood for its easy handling, the third part is the software design, it is subdivided in two sections, the first one is LabVIEW the programming and the second is Arduino programming; the fourth part is about the flow diagrams for each practice, and finally there is the practices manual where each of them is specified: uniform rectilinear movement, uniformly varied rectilinear motion, kinetic energy, work and power. In the fifth chapter a results analysis is made to expose them by means of conclusions and recommendations, in order to meet this objective, the first and second year students of the Catholic University Educational Unit were surveyed after having completed the internship.