Desarrollo de un manual de procesos para el departamento de ti basado en cobit 5. en el municipio del cantón el Tambo

Fecha
2022-05-24
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad Catolica de Cuenca extension Cañar
Resumen
ABSTRACT The present thesis work entails the design of an automated irrigation system prototype, which helps to maintain the balance of soil moisture causing water to be used efficiently, along with the use of an Arduino microcontroller and humidity and environment sensors. To design such a prototype, it must have two sensors one, that measures the soil moisture, and the other, that measures the humidity of the environment. These sensors will transfer the information to the Arduino microcontroller, which then will decide according to both the parameters and conditions imposed on the script, whether it is necessary to activate the automatic irrigation resulting in turning on the water pump. Consequently, the soil humidity is controlled, helping to avoid an excess or deficit of humidity in the orchard. To validate it, tests were carried out in different soil moisture environments giving optimum results according to the conditions imposed on the operation of the prototype. Keywords: automation, automatic irrigation, arduino, sensors, microcontroller
Descripción
RESUMEN El presente trabajo de tesis consiste en el diseño de un prototipo de sistema de riego automatizado, que ayuda en el equilibrio de la humedad del suelo haciendo un uso eficiente del agua, conjuntamente usando un microcontrolador Arduino y sensores de humedad y ambiente. Para realizar el prototipo se debe tener dos sensores, uno que mida la humedad del suelo y el otro la humedad del ambiente, estos sensores transmitirán información al microcontrolador Arduino el cual decidirá según los parámetros y condición impuestos en el script si es necesario o no activar el riego automático, dando lugar al encendido de la bomba de agua. De esta manera se controla la humead del suelo ayudando a evitar un exceso o déficit de la misma en el huerto. Para comprobar esto se realizaron pruebas en distintos ambientes de humedad del suelo dando resultados óptimos acorde a las condiciones impuestas para el funcionamiento del prototipo. Palabras Clave: automatización, riego automático, arduino, sensores, microcontrolador.
Palabras clave
Desarrollo de un manual de procesos para el departamento de ti basado en cobit 5. en el municipio del cantón el Tambo
Citación