Estructuras hidráulicas para riego: conducción, medición, distribución y mantenimiento

Fecha
2018
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad Católica de Cuenca.
Resumen
Present it thesis accomplishes the analysis and the theoretic design of the hydraulic structures that are utilized for conduction, measurement and distribution of the water toward the plots of land of a system of irrigation. The most relevant aspects of the project are described in the first chapter like: The formulation of the problem, delimitation of the problem, the objectives that it are intended to catch up with, the justification and the methodology that will be used to achieve the aforementioned purposes. You refer the second chapter to the theoretic frame of the hydraulic structures that they are utilized for the conduction of water; They detail beginnings and basic that is owed concepts to know to accomplish analysis and correct designs. Besides they describe the procedures to sell off the hydraulic dried design to step of the aforementioned infrastructures. They detail the same just described guidelines in the third chapter but now focused to the structures of distribution. They give themselves some guidelines to accomplish the periodic maintenance of these hydraulic works in the fourth chapter. They will finally tell someone to know the pre-sizings obtained with the data provided by the GADPC; Of the following hydraulic infrastructures: Canals, pipes, fast, tanks deliverymen of flow intensity and drains.
Descripción
La presente tesis realiza el análisis y el diseño teórico de las estructuras hidráulicas que son utilizadas para la conducción, medición y distribución del agua hacia las parcelas de un sistema de riego. En el primer capítulo se describe los aspectos más relevantes del proyecto como: La formulación del problema, delimitación del problema, los objetivos que se pretenden alcanzar, la justificación y la metodología que será empleada para lograr dichos propósitos. El segundo capítulo refiere al marco teórico de las estructuras hidráulicas que son utilizadas para la conducción del agua; se detallan los principios y conceptos básicos que se debe de conocer para realizar análisis y diseños correctos. Además se describen los procedimientos para realizar el diseño hidráulico paso a paso de dichas infraestructuras. En el tercer capítulo se detallan los mismos lineamientos descritos anteriormente pero ahora enfocado a las estructuras de distribución. En el cuarto capítulo se dan algunas pautas para realizar el mantenimiento periódico de estas obras hidráulicas. Finalmente se darán a conocer los predimensionamientos obtenidos con los datos proporcionados por el GADPC; de las siguientes infraestructuras hidráulicas: Canales, tuberías, rápidas, tanques repartidores de caudal y vertederos.
Palabras clave
Análisis, Criterios, Diseño Hidráulico, Procedimiento, Mantenimiento
Citación
Lema Guallpa, M.M. (2018) Estructuras hidráulicas para riego: conducción, medición, distribución y mantenimiento. Universidad Católica de Cuenca.